Domingo Aéreo 2022 AFA - Pirassununga - SP Ninho das Águias
Domingo Aéreo 2022 AFA - Pirassununga - SP Ninho das Águias
Domingo Aéreo 2022 AFA - Pirassununga - SP Ninho das Águias
Domingo Aéreo 2022 AFA - Pirassununga - SP Ninho das Águias
WELCOME TO
JUNIAER MODEL AIRPLANES !
Art in Model Airplanes
Welcome to Juniaer website!
Here we present our history and our products. Tradition of quality in the manufacture of high performance and high level handcrafted finishing model airplanes! Get in and know more about what we have to offer...
40 países! 40 countries!
40 países! 40 countries!
Melhor aeromodelo escala Best scale model airplane
Philippine Air Force
AFA 30 anos
Melhor aeromodelo escala Best scale model airplane
OUR MODELS
T-27 Tucano 20cc
After years of experience, improvements and evolution of technology we are pleased to present our new version of this classic and beloved model airplane so popular for its sport/scale aerobatic flight with docile and predictable aerodynamic behavior. A model that surprises by the scale visual, details such as antennas, rivets, panel lines, exhaust replicas, main and front landing gear doors (not installed), handmade painting with top quality finish, scale adhesives according to the painting scheme applied and varnished in the model, and also for the pleasure of flying, since it remains stable in high and low speeds, scale flaps give much realism and stability for landings and slow flight. Prepared for installation of retracts (not supplied) pneumatic, mechanical or electrical, a wide variety of equipment can be used without problems or adaptations. Prepared for installation of scale navigation lights (not supplied), wing tips and wing landing lights with clear lenses. This is the T-27 Tucano 20cc ARF Juniaer.
High-quality epoxy resin model with structural reinforcements, low weight and high strength due to high technology FULL COMPOSITE vacuum lamination technique.
2 piece wing (1 aluminum tube) laminated in fiberglass and epoxy resin with carbon fiber reinforcements and plywood and balsa laser cut structural parts. Ailerons, flaps, and elevators are factory hinged in perfect alignment. Wing and stabilizer servos are internal for improved scale appearance and fixed in structural plywood laser cut ribs for easy and quick installation and precise flight controls command.
Fuselage made of epoxy resin laminated with fiberglass fabrics and carbon fiber structural reinforcements, providing high structural strength and low weight with extensive durability. Rudder to be installed with hinge points provided with the kit. Servo tray and tank tray in laser cut plywood. Great finishing with automotive paint, adhesives according to painting scheme and varnished for optimal durability. Transparent canopy and resin canopy frame can be installed fixed or with opening and closing mechanism, resin cockpit with replicas of seats and control panels, scale pilot available separately. Firewall installed with correct and definite angles, with center marking and drilling points. 2 part engine cowl provided without cutouts making it easy to access the engine for adjustments or checkups. It must be cut into the final assembly according to the position of engine, exhaust and installed accessories. Side door with opening and closing mechanism installed and ready to accommodate on/off switches, fuelers, voltage monitors and other equipment to be installed on the model aircraft.
The T-27 Tucano 20cc is indicated as: Advanced Low Wing Trainer, for acrobatic initiation, the model airplane becomes very stable and docile at low commands rate and the flaps ensure support for a good landing. Stall speed reduced and enlived by Juniaer aerodynamics resources; Scale Model Airplane, for realistic flight reprodutions and acrobatics as cuban eights, slow rolls, 4 point rolls, stall turns, loopings, inverted flight, etc... ; Sport/Scale Model Airplane, for high adrenaline acrobatics as snap rolls, knife edge, high speed dives, lancevack, etc...
DOES NOT INCLUDE ASSEMBLY ACCESSORIES such as linkages, fuel tank, retracts, wheels, engine, spinner, propeller, radio and electronic equipments, etc...
Specifications:
Wingspan: 1797mm
Lenght: (no spinner 1405mm)
(with spinner 1480mm)
Weight (no acessories installed): 5.51 lb (2500g) FULL COMPOSITE
Flying Weight: 11 to 13.22 lb (5Kg - 6Kg)
Engines: Glow 2 cycle (90 to 120)
Glow 4 cycle (100 to 125)
Gas Burning (20cc)
Electric (450kV 1800W 18,5 to 22,2V LiPo)
Rádio: Mínimum 6 channels with limited features - We recommend 7 or more channels
Servos: All servos must be 55.5 oz/in torque or more.
With gas burning engine all servos must be metal geared.
Ailerons: 2 servos Flaps: 2 servos Elevators: 2 mini-servos
Rudder and steering: 1 servo
Throtle: 1 servo (except with electric motor)
Retracts: 1 servo (pneumatic or spring air) 2 servos (mechanics) or servoless
Spinner: 2 1/2" (63,5mm) WHeels: 2 3/4" (69,85mm) main and 2" (50,8mm) front
T-27 Tucano 50cc
An innovative model airplane on the popular 50cc class that surprises by the scale visual, details such as antennas, rivets, panel lines, exhausts replicas, pitot tube replicas, main and front landing gear doors (not installed) , handmade painting with high quality finishing, scale adhesives according to the chosen painting applied and varnished in the model airplane, and also for the pleasure in flying, since it remains stable in high and low speeds, scale flaps give much realism and stability for landings and slow flights. Prepared for installation of retracts (supplied separately) pneumatic, mechanical or electrical, a wide variety of equipment can be used. Prepared for installation of scale navigation lights (supplied separately), wing tips and wing landing lights with clear lenses.
High-quality epoxy resin model with structural reinforcements, low weight and high strength due to high-tech FULL COMPOSITE vacuum lamination technique. Wing and stabilizer in two pieces (1 aluminum tube in the wing and 1 in the stabilizer) laminated in fiberglass and epoxy resin with reinforcements of carbon fiber and structures in laser cut plywood and balsa wood. Clear canopy and resin canopy frame can be installed with open/close mechanism (not included), resin cockpit with instruments panels and seats replicas. Aileron, flaps, and elevators factory hinged with perfect alignment. Rudder to be installed with hinge points provided with the kit. Servos tray and tank tray in laser cut plywood. Wing and stabilizer servos installed inside the reinforcing ribs, allowing accurate and safe linkage. 2 piece engine cowl provided with no cutouts, making access to adjustments or engine checks and fueling easy. It must be cut in the final assembly according to the position of engine, exhaust and installed accessories. Firewall installed with correct and definitive angles, with center marking.
Side door with opening and closing mechanism installed and ready to accommodate on / off switches, fuelers, voltage monitors and other equipment that are installed on the model aircraft.
The indications of the T-27 Tucano 50cc are: Scale Model, for realistic flight reproduction and scale aerobatics, like Cuban eights, slow rolls, 4 point rolls, loopings, split S, etc. ... Reduced stall speed and smooth flight characteristics garanteeed by Juniaer aerodynamic features. Flaps guarantee lift for a good landing. Check out videos on our You Tube channel!
Especifications:
Wingspan: 90.55 in (2300mm)
Lenght: 80.71 in (2050mm)
Weight (no acessories): 10.15 lb (4.400g) FULL COMPOSITE
Flying Weight: 22 to 26 lb (10Kg to 11,5Kg)
Engines: Gasoline burning (50 a 60cc)
Electric Motors (230kV 5000W 33,3V to 55,5V LiPo)
Radio: Mínimum 7 channels with limited features
We reccommend 9 or more channels
Servos: All servos must be metal geared
Rudder and steering: 1 servo 15Kg or more torque
Ailerons: 2 servos Flaps: 2 servos Elevator: 2 servos 10Kg or more torque
Throtle: 1 servo (not used qith electric motor) 5Kg or more torque
Choke:1 servo (optional) Retracts:1 servo (pneumatic/spring air) or servoless (electric)
Spinner:3 1/2"(88,9mm) Wheels:3 3/4" to 4"(95,25mm-101,6mm) mains and 3 1/4"(82,55mm) front
Colombia Drakos
T-27 Tucano TurboProp 45
After years of research, the Juniaer team is honored to introduce our Turbo Prop version of the T-27 Tucano model airplane, adapted from the 50cc platform with a carbon fiber mount for King Tech KT45TP turbine. Manufactured 100% with Full Composite, with exclusive air cooling system and realistic appearance. Tested and approved in flight, our solutions proved to be at the height of the most demanding modelists and pilots, providing an international quality ARF kit manufactured in Brazil with the best materials available in the market.
Specifications:
Wingspan: 2,30m (90.55 in) Lenght: 2,05m (80.71 in)
Wing Area: 84,63 dm2 Wing Loading: 113g/dm2
Weight: approx. 4,6 Kg (10.14 lb) (without accessories)
11,5 a 12 Kg (25.35 to 26.45 lb) (flying weight)
Radio: Minimum 12 channels (not included)
Recommended acessories:
- King Tech KT-45 TP turbine or Xicoy X45TP
- pair of 60º exhaust exits
- propeller
- 3 1/2" aluminum spinner
- HD retracts landing gear set (must be reliable)
- UAT tank
- 8 units Tchê Jets carbon fiber horns
- 16 units 4-40 spheric conections
- 8 servos MG minimum 180oz-in torque
- 3 double air valves
- 1 simple air valve for brakes
- 33 ft 3mm air lines (3 colours)
- 12 pairs of quick air conectors Robart or similar
- 20 units 3mm "T" conectors FESTO or similar
- 2 units air pressure gauges
- 2 units air fill valves
- 2 units large air tanks
- 2 units HD on/off switches (JR Gold style)
- 2 units 3200mAh LiFe 2S batteries
- 6.6 ft gasoline lines (4mm internal diameter)
- fueler and breather
- 8 aluminum servo arms
- 4-40 pull-pull system
- 4 units 4-40 full treaded wires
- 9,9V minimum 2100mAh battery for turbine
- 6 units air cilinders 38mm diam 2 3/4 lenght (gear doors)
- 12 units Tchê Jets door hinges
Foto: Rubens Barbosa
Xicoy X45TP
A-29 Super Tucano 85cc
After years of research, design and detailing, the Juniaer team is honored to present the new A-29 Super Tucano model aircraft, designed for 85cc engine with carbon fiber engine mount for DLE-85cc engine.
100% Full Composite manufacturing, with exclusive air cooling system and realistic appearance.
Tested and approved in flight, our solutions have proved to be the height of the most demanding model aircraft, providing an ARF kit of international quality manufactured in Brazil with the best materials available on the market.
Specifications:
Wingspan: 2800mm
Length: with spinner 2630mm
Weight without equipment: g FULL COMPOSITE
Flying weight: 16,5 Kg a 18 Kg
Engine: DLE-85cc or electric equivalent
Radio: 12 channels minimum
Servos: All servos should be metal geared
Rudder: 1 servo 20Kg/cm or more torque
Front wheel steering: 1 servo 10Kg/cm or more torque
Front landing gear door: 1 servo 10Kg/cm or more torque
Throttle: 1 servo 5Kg/cm or more torque
Ailerons: 2 servos 15Kg/cm or more torque
Flaps: 2 servos 20Kg/cm or more torque
Elevator: 2 servos 15Kg/cm or more torque
Retracts: servoless (electric) with electric or pneumatic brakes
Spinner: 4 3/4"(120mm)
More information coming soon
A-29 Super Tucano Turboprop 60
After years of research, project and detailing Juniaer Team is honoured to present the new A-29 Super Tucano, designed for 60 Turboprop with carbon fiber turbine mount to fit Kingtech 60TP turbine.
Full Composite manufacturing, with exclusive cooling system and very realistic appearance.
Tested and aproved in flight, our solutions proved to be at the height of the most demanding model airplaners, providing an ARF Kit with international quality made in Brazil with the best available materials.
Especifications:
Wingspan: 2800mm
Length: com spinner 2630mm
Flight weight: 20 Kg a 21 Kg
Turbine: KingTech 60TP
Rádio: 12 channels minimum
Servos: All servos must be metal geared
Rudder: 1 servo 20Kg or more torque
Front wheel steering: 1 servo 10Kg or more torque
Front landing gear door: 1 servo 20Kg or more torque
Ailerons: 2 servos 15Kgs or more torque Flaps: 2 servos 20Kgs
or more torque Elevator: 2 servos 15Kg or more torque
Retracts: servoless (electric) with brakes
Spinner: 4 3/4"(120mm)
JUNIAER TOUCANEERS GALLERY
ADDRESS:
Av. José Augusto Filho, 230/240 - Jd Bela Vista
CEP 37.968-000 Monte Santo de Minas - MG
e-mail: juniaer@hotmail.com
Tels: +55 (35) 3591-1036
+55 (35) 99149-8548 (Elton Uzai - Whatsapp)
OPENING HOURS
Monday - Friday: 08:00 - 17:30
Saturday: 08:00 - 11:30